用户名:  密码:   
您当前的位置:首页 > 电脑与网络 >  交换机,路由,AC > 

华为5760瘦AP升瘦胖AP及胖AP再切换瘦AP成功的方法

上次修改时间: 2022-06-01 11:06:39      来源:网络总结      作者:钢铁长陈
上一页      路径:DSD\Learn\路由与交换机\关于升级方面的问题\      下一页

 

华为瘦AP升级瘦AP新版本成功的方法:(用IPOP4.1作为FTP服务器)
[Huawei]upgrade version ftp FitAirEngine5760-10_V200R019C00SPC907.bin 169.254.1.10 admin 123456
===================================================================

华为瘦AP切换胖AP成功的方法:(要求同一版本)
[Huawei]ap-mode-switch fat ftp Fat&CloudAirEngine5760-10_V200R019C00SPC907.bin 169.254.1.10 admin 123456
Warning: The system will reboot and start in fat mode of V200R019C00SPC907. Continue? (y/n)[n]:y
Warning: Do Not Power-off!
..........................................................................................................................................................................................................................................................................
Info: system is rebooting ,please wait...
[Huawei]dis ver
Huawei Versatile Routing Platform Software
VRP (R) software, Version 5.170 (AirEngine5760-10 FAT V200R019C00SPC907)
=======================================================================

胖AP切换瘦AP成功方法
直接用Putty0.7使用SSH方式登录169.254.1.1,胖AP的WEB页面登录地址为192.168.1.1, 但如果要切换为瘦AP还是要用一台电脑网线连接到AP的网口,并把电脑的IP设为192.168.1.10 255.255.0.0
[Huawei]ap-mode-switch fit ftp FitAirEngine5760-10_V200R019C00SPC907.bin 169.254.1.10 admin 123456
Warning: The system will reboot and start in fit mode of V200R019C00SPC907. Continue? (y/n)[n]:y
Warning: Do Not Power-off!
.........................................................................................................................................................................................................................................................................................................................................................................................................
Info: system is rebooting ,please wait...
<Huawei>dis ver
Huawei Versatile Routing Platform Software
VRP (R) software, Version 5.170 (AirEngine5760-10 FIT V200R019C00SPC907)

注:
1.以上操作都是先用网线把电脑直接接到AP网口,再把电脑IP设为169.254.1.10,再用IPOP4.1作为FTP服务器,把升级文件放在FTP根目录,用Putty0.7通过SSH方式登录到AP的IP169.254.1.1再来操作
2.如提示Error: Upgrade failed due to a failure in downloading the version 就把IPOP4.1以管理员身份运行